The router reset is often one of the most confusing technical steps in the installation process of your Arris DSL modem. It can also cause many problems for users that do not know how to login as the reset button does not work in a standard way. If you reset the modem, you will usually not have an option to change the IP addresses that were used previously. There are other steps needed in order to fully utilize the new settings. Here is information that will help you to reset the modem to provide the username and password.

 

You should first check the connection settings page. Find the section that requires you to enter the IP address of your router. For example, if it is configured to allow the use of either eth1 or eth2, then you should enter that address before you click Save. You should remember that the settings on your arris router IP address are saved in a default unless you change them.

 

After you have entered the IP address, you should click the Change user name or the Change password link to log into the router. When you click the Change username or password link, you will be shown a page with a default username and password. If you have changed the default username and password, you will need to click on Change to the left of the page in order to see the page where you can type a new one in.

How to Login Arris Router - How to Reset the Router's Settings to Gain Access

 

How To Login Arris Router is also different depending on if you are using the wireless network or the internet connection. If you have used the wireless network, you can go to the Wireless tab and click on Wireless Networking. On the left side of the page you will find a tab for SSID and then a tab for Wireless Assistance. Click on the tab for Wireless Assistance and you will see a page with the login information.

 

The login arris router default password is 'admin' but you can change it to anything you want. However, changing the arris login username is not supported by some of the software programs on the computer. If you want to change the arris login username, you should click on Tools, Preference Manager, Addition Methods tab and then click on Change. Here you will be given a page with a blank password. You need to enter the password in the form given and click on Change to save.

 

If you are using the internet connection, you need to follow the same steps as if you were using the wireless network. To change the password, click Tools, Preference Manager, Shared Setup Password, Change and click on Change to save. You will also be asked to enter your name and the IP address of the person you want to configure the arris router with. After these steps are complete, you should be able to log into the setup arris router login page.

 

For the third step, you need to access the settings utility for the arris sBG1672g router. By clicking the 'Settings' icon, you will be able to access the setup arris router login page. Here you will need to enter your name and the IP address of the person you have given access to the router. For security purposes, you should make sure that you use a strong password. Click OK to finish all the steps.

 

For the last step, you need to go back to the artist router login page and click on the reset button. This is done to reset the DNS server. After this, you should click on the big 'OK' button. When you are done, you can then proceed to log into the system by typing your name and the IP address of the computer that you are using. To make sure that everything is working fine, you can then save any changes that you have made.

Thank you for reading, If you want to read more blog posts about how to login arris router don't miss our homepage - Maryworonov We try to update our site every day